Omatei Mechanical And Electrical Equipment Co., Ltd
Because dedicated, So professional With integrity, Work practically
Add to Cart
Gripping of round or irregular workpiece does not need to change the chuck.
The chucks are designed according to ASA B5.9 type A spindle.
The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground to increase running accuracy and longer service life
UNIT : mm
| SPEC Model | Through-Hole (mm) | Plunger Stroke (mm) | Jaw stroke (In Dia.) (mm) | Max.Pull Force (kn) | Max.Gripping Force (kn) |
|---|---|---|---|---|---|
| NHT-208A5 | Ø52 | 16 | 7.4 | 2243 / 1495 | 5812 /3875 |
| NHT-208A6 | Ø52 | 16 | 7.4 | 2243 / 1495 | 5812 /3875 |
| SPEC Model | Max.Operating Pressure (kgf / cm2) | Max.Speed (r.p.m.) | Weight (kg) | Moment Of Inertia | Matching Cylinder | Matching Hard Jaw |
|---|---|---|---|---|---|---|
| NHT-208A5 | 17.2 / 12.1 | 3500 | 25.2 | M1552 | HJ06 | HC08-1 |
| NHT-208A6 | 17.2 / 12.1 | 3500 | 24.7 | M1552 | HJ06 | HC08-1 |
| DIM Model | A | B | C(H6) | D | E | F | G | H | J | K | L | M | Nmax. | Omax. | Omin. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NHT-208A5 | 210 | 113 | 170 | 20 | 23 | 82.56 | 133.5 | 104.8 | 13 | 6xM12 | 52 | 5 | 41.8 | 34 | 7.5 |
| NHT-208A6 | 210 | 107 | 170 | 20 | 17 | 106.4 | 150 | 133.4 | 17 | 6xM12 | 52 | 5 | 41.8 | 34 | 7.5 |
| DIM Model | Pmax. | Pmin. | Q | R | S | T | Umax. | V | W | X | Y | Reference |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NHT-208A5 | 37.5 | 21.5 | 2 | 12 | 20.5 | 32 | M60x2 | 6xM10 | 66 | 37 | 73 | Fig-2 |
| NHT-208A6 | 31.5 | 15.5 | 2 | 12 | 20.5 | 32 | M60x2 | 3xM6 | 66 | 37 | 73 | Fig-1 |